Williams Tools a Snap-On Brand SAE / Metric Black Straight Pattern Box End Striking Wrenches 35 Sizes Available
Industrial Black Finish, 12 Point, SAE / Metric
| Product Code | Size | Overall Length | |
| SFH-1808BW | 1-3/16" | 30mm | 7-9/16" |
| SFH-1808W | 1-1/4" | 32mm | 7-9/16" |
| SFH-1808AW | 1-5/16" | 33mm | 7-9/16" |
| SFH-1808CW | 1-3/8" | 35mm | 7-21/32" |
| SFH-1809W | 1-7/16" | 7-21/32" | |
| SFH-1809BW | 36mm | 7-21/32" | |
| SFH-1809AW | 1-1/2" | 38mm | 7-21/32" |
| SFH-1810W | 1-5/8" | 41mm | 7-21/32" |
| SFH-1810AW | 1-11/16" | 43mm | 7-13/16" |
| SFH-1810BW | 1-3/4" | 44mm | 7-15/16" |
| SFH-1811W | 1-13/16" | 46mm | 7-15/16" |
| SFH-1811AW | 1-7/8" | 7-15/16" | |
| SFH-1812BW | 50mm | 11-19/32" | |
| SFH-1812W | 2 | 51mm | 11-19/32" |
| SFH-1812AW | 2-1/16" | 52mm | 11-19/32" |
| SFH-1813W | 2-3/16" | 55mm | 11-3/4" |
| SFH-1813AW | 2-1/4" | 57mm | 11-3/4" |
| SFH-1814W | 2-3/8" | 60mm | 11-7/8" |
| SFH-1814AW | 2-7/16" | 62mm | 11-7/8" |
| SFH-1814BW | 2-1/2" | 64mm | 11-7/8" |
| SFH-1815W | 2-9/16" | 65mm | 13" |
| SFH-1815AW | 2-5/8" | 67mm | 13" |
| SFH-1816W | 2-3/4" | 70mm | 14-9/32" |
| SFH-1816AW | 2-13/16" | 71mm | 14-9/32" |
| SFH-1816BW | 2-15/16" | 75mm | 14-13/32" |
| SFH-1817AW | 3" | 76mm | 14-13/32" |
| SFH-1817W | 3-1/8" | 80mm | 17-19/32" |
| SFH-1818AW | 3-3/8" | 85mm | 17-19/32" |
| SFH-1818W | 3-1/2" | 89mm | 17-13/16" |
| SFH-1819BWA | 3-3/4" | 95mm | 17-29/32" |
| SFH-1819WA | 3-7/8" | 98mm | 17-29/32" |
| SFH-1819CWA | 4-1/8" | 105mm | 18-5/32" |
| SFH-1819AWA | 4-1/4" | 108mm | 18-5/32" |
| SFH-1820BWA | 4-1/2" | 114mm | 20-1/32" |
| SFH-1820WA | 4-5/8" | 117mm | 20-1/32" |
Features
- Striking face wrenches are designed to be struck by a hammer on the anvil area in order to loosen frozen fasteners or to set and tighten fasteners.\
- Anvils are proportional to opening sizes. Special heat treating provides maximum durability for long life.
- Straight handle design resists springing while allowing the fastener to turn more easily.
- Williams’ expanded line of offset striking face wrenches, up to 4-5/8”, provides the most extensive line on the market.
- Specifically engineered to hold up under the most rigorous industrial use.
- Made in USA
