Williams Tools a Snap-On Brand USA Heavy Service C-Clamps 17 Sizes Available
Deep Throat Design, Standard Screw
Product Code | Max. Capacity | Min. Capacity | Throat Depth From Center | Exterior Body Width | Screw Diameter | Screw Length Under Head | Min Test Load (lbs.) |
CC-1AAW | 1-3/8" | 0" | 1-1/8" | 2-23/32" | 13/32" | 2-7/16" | 5600 |
CC-1-1/2AAW | 1-7/8" | 0" | 1-21/32" | 3-19/32" | 5/8" | 3-1/4" | 8750 |
CC-2AAW | 2-11/32" | 0" | 1-7/8" | 4-1/4" | 23/32" | 4-1/8" | 12500 |
CC-3AAW | 3-7/16" | 1/8" | 2-13/32" | 5-3/4" | 27/32" | 4-7/8" | 16250 |
CC-3LAAW** | 3-7/16" | 0" | 2-1/2" | 5-3/4" | 27/32" | 5-3/4" | 16250 |
CC-4AAW | 4-21/32" | 17/32" | 2-7/8" | 6-1/4" | 27/32" | 6" | 20000 |
CC-4LAAW** | 4-21/32" | 0" | 2-7/8" | 6-1/4" | 27/32" | 7-1/4" | 20000 |
CC-5AAW | 5-5/8" | 1/2" | 3-1/8" | 7" | 27/32" | 7-1/4" | 23800 |
CC-5LAAW** | 5-5/8" | 0" | 3-1/8" | 7" | 27/32" | 8-7/8" | 23800 |
CC-6AAW | 6-1/2" | 1-5/32' | 3-1/2" | 7-1/2" | 1-3/32" | 8" | 27500 |
CC-6LAAW** | 6-1/2" | 0" | 3-1/2" | 7-1/2" | 1-3/32" | 10" | 27500 |
CC-8AAW | 8-1/2" | 4" | 3-11/16" | 8-1/2" | 1-3/32" | 7-1/8" | 31250 |
CC-8LAAW** | 8-1/2" | 0" | 3-11/16" | 8-1/2" | 1-3/32" | 11-5/8" | 31250 |
CC-10AAW | 10-3/8" | 5-3/8" | 4-3/8" | 8-1/2" | 1-3/32" | 7-3/4" | 35000 |
CC-10LAAW** | 10-3/8" | 0" | 4-5/16" | 8-1/2" | 1-3/32" | 14-3/8" | 35000 |
CC-12AAW | 12-3/8" | 7-1/4" | 4-7/16" | 9-1/2" | 1-3/32" | 8-1/4" | 40000 |
CC-12LAAW** | 12-3/8" | 0" | 4-1/4" | 9-1/2" | 1-3/32" | 16-7/16" | 40000 |
** Where Zero capacity is desired, the clamps with long screws should be ordered. There are indicated with an "L" in the product code.
Features
- Especially designed for heavy duty service, frames are drop-forged and heat-treated for maximum strength and reduced springing.
- Screws are made of special grade steel and are heat-treated for added strength not found in typical case-hardened screws.
- To tighten, the square headed screw must be turned with a wrench.
- Ideal for the most demanding applications such as construction and heavy industry.
- Square head screw allows tightening with wrench for extra heavy duty clamping requirements.
- Greater anvil surface for gripping larger work pieces and for greater stability.
- Made in USA.